novelnext Chapter 6 Level 8 Craftsmen Actively Take on Apprentices
Chapter 6 Level 8 Craftsmen Actively Take on Apprentices
As a level eight worker in the factory, he was a treasure among treasures, so he naturally had confidence.
Even the factory's top leader has to give him face.
Zhao Dehai sipped his tea, unhurriedly asking, "Are you finished?"
"That's all."
"Let him process one workpiece first. If it works, you can keep him. If not, I'll personally take him away for you; I won't cause you any trouble. Master Guo, what do you think of this?"
Guo Dajiang was taken aback: "You trust him that much?"
Zhao Dehai said earnestly, "I saw him working on his first day at the factory. His skills are definitely comparable to a level six worker. Moreover, he is still very young. To have reached the level of a level six worker in his early twenties shows that he has a great talent for fitter work. After he works in your group for a while, I believe that it won't be long before our factory has another senior worker."
Guo Dajiang left helplessly.
Since Zhao Dehai has already said that, what else can he say?
Let's test Chen Weiguo's skills then.
If that doesn't work, didn't Zhao Dehai promise to take the person away?
We'll talk about it later.
Guo Dajiang returned to the workshop, wrote a task sheet, and handed it to Chen Weiguo.
"I have a job here: oil line connectors for aircraft engines. It requires N6 precision and V5 surface finish, and the material is a nickel-based alloy. Do you think you can do it?"
Chen Weiguo glanced at the blueprints, then nodded: "It's acceptable."
The experienced workers nearby exchanged glances when they saw him agree.
This kid is really arrogant and ignorant.
This kind of requirement is not something a level six worker can meet.
Generally, one needs to be a level 7 or even level 8 worker to meet the standard.
Old Liu, a level-seven fitter, leaned against the lathe with his arms crossed, and whispered to the person next to him, "This material is so hard and sticky, it's hard to control even when the drill is cutting. I'm struggling to work on it, let alone a level-six fitter?"
Shh, just look.
Chen Weiguo ignored these questions.
He walked to his workstation and mentally accessed the system's database.
The system automatically provides the optimal process route, including which tool type to select, how much spindle speed to adjust, how much feed rate to set, and how to prepare the cutting fluid.
He was given a clear and detailed explanation of every step.
"This industrial technology system is a real boon to me."
Chen Weiguo was filled with emotion, and his confidence soared.
The system has laid out all the steps completely and flawlessly. If you still can't do it, then you're truly useless.
He immediately began working according to the optimal process route given by the system.
As soon as the cutting sound started, the expressions of the experienced workers nearby changed.
Master Liu was somewhat surprised.
When cutting nickel-based alloys, if the parameters are not correct, the sound is as harsh as killing a chicken.
But when Chen Weiguo swung his knife, the sound was muffled and deep, and you could tell right away it was the right kind of sound.
Surprisingly, this kid got it right as soon as he started.
They're really good at this.
After cutting, I started changing the blade to drill holes.
They drilled small-diameter deep holes, a job that is notoriously difficult to do on nickel-based alloys.
The drill bit encounters significant resistance when it goes down, and poor chip removal can easily cause it to break.
Machining a set of parts consumes a considerable amount of drill bits alone.
Whoever does it will get a sore spot.
But as soon as Chen Weiguo went down, the surrounding masters stared intently at him.
The drill bit in his hand was very steady, without even the slightest deviation.
With the coolant applied, the chips flowed out along the spiral grooves without causing any blockage.
"That hand is really steady; he's got the makings of a fitter."
The masters were somewhat convinced.
They had worked in the factory for over twenty years and had never seen a level six worker dare to work with nickel-based alloys like this.
I've never seen such steady hands before.
Three hours later.
Chen Weiguo placed the finished parts on the inspection table and said to Guo Dajiang, "Master Guo, I'm done."
At this moment, Guo Dajiang's gaze toward Chen Weiguo was no longer one of doubt, but of satisfaction.
Although no tests have been conducted yet, Chen Weiguo witnessed the entire process of his work.
It can be said that he is an outstanding young man.
There were many things he did that even he hadn't expected.
However, just to be on the safe side, he still took the parts into the testing room.
When the people in the laboratory saw that it was Guo Dajiang, they didn't dare to be careless.
If an eighth-grade technician personally submits the samples for testing, that would be outrageous!
He immediately took out a micrometer, a surface finish template, and an inside micrometer, and measured each one repeatedly several times.
The inspector asked in surprise, "Master Guo, who manufactured this part?"
"What's wrong? Is there a problem?"
The inspector handed him the test report and took a deep breath: "He broke the precision record for similar parts in our factory."
"What?"
Guo Dajiang quickly looked at the test report.
It says on it: flatness 0.84, the standard for N6 is no more than 1.24.
The surface finish is now V6; they previously only required V5.
The aperture precision of the holes processed by Chen Weiguo reached N5.
It is a level higher than the required N6.
All three core indicators broke the precision records of similar parts in the factory.
Talent!
Guo Dajiang felt a surge of emotion.
Zhao Dehai should be the factory director.
Look at your discerning eye! You've brought such a talented person to your doorstep.
The inspector asked curiously, "Master Guo, I've worked in the inspection department for seven or eight years, and this is the first time I've seen such beautifully finished material. Did you process it yourself?"
In his opinion, only a level eight worker like Guo Dajiang could make such beautiful parts.
Guo Dajiang smiled and shook his head: "I didn't do it. It was done by a young guy who just joined our team."
The inspector paused for a moment: "A young man? Master Guo, what level of skill is this young worker?"
"Level 6 worker".
"What? Level 6?"
The inspector suspected that Guo Dajiang was joking with him.
"A level six technician can achieve this level of precision? Are you kidding me?"
But Guo Dajiang has worked in the factory for more than 20 years and is a level 8 fitter. Now he has been entrusted with an important task by Director Zhao and is the leader of the military trial production group. He never jokes.
In other words, what he said is true.
A young, level-six skilled worker has indeed arrived at the military industrial trial production team.
Moreover, this person's skill level is extremely high.
The inspector couldn't help but ask, "Mr. Guo, who is this young man you're talking about?"
His name is Chen Weiguo.
Back in the workshop, Guo Dajiang called Chen Weiguo over.
"Xiao Chen, could you tell me how you determined this processing technique?"
I knew you guys would be curious.
Chen Weiguo had already made preparations and explained the best process route that the system had prepared for him in detail.
As Guo Dajiang listened, his eyes grew brighter and brighter.
He even wrote it down on paper.
After taking notes, Guo Dajiang looked at him with satisfaction: "Xiao Chen, you'll be working with me from now on. I'll personally train you, how about that?"
The workers in the workshop immediately looked at Chen Weiguo with envy.
Guo Dajiang hasn't taken on any apprentices for over a decade!
Many people wanted to become his disciples, offering gifts and pulling strings, but Guo Dajiang never agreed.
Because he felt these people were unqualified and too stupid.
Today, he actually took the initiative to accept Chen Weiguo as his apprentice.
This immediately caused a sensation among the crowd.